D&D SureClose 57SF W 90 Degree Center Mount Self-Closing Hydraulic Thrust Bearing Gate Hinge-Closer - 75057124
Details
D&D SureClose 57SF W 90 Degree Center Mount Self-Closing Hydraulic Thrust Bearing Gate Hinge-Closer - 75057124
Steel SureClose 57SF W Thrust Bearing Hinge Closer was designed for large, commercial and residential gates with a point load up to 1,500 Approved for pool and child safety gates.
- Self Closing
- Horizontally Adjustable
- Pool/Child Safety
- Max Gate Swing: 90 degrees
- Hinge Gap: 2-1/2" - 3"
- Fence Post Size: 2-12"
- Center Mounted
- Type: 57SF W
*Please Note: Gate will not hold open at 90 degrees (making it okay for use on pool and child safety gates). SureClose SF models require a separate gate stop to be installed to prevent the gate from being forced past 90 degrees. Recommended opening setting is 85 degrees to take into consideration possible installation abnormalities. To properly install this gate closer, you will need to purchase the D&D GateStop - Soft, Quiet Gate Closure - TCGS3, sold separately. Absence of a gate stop will void warranty on this product. D&D recommends installing the gate stop at the bottom of the fence post if gate is lower than 84" (210cm).
**Please Note: Post Mounting Brackets Sold Separately. Recommended Model: D&D Model 7526
| SKU | 75057124 |
|---|---|
| Series | SureClose |
| Unit Combination | Single |
| Max Gate Swing | 90° |
| Hinge Gap | 2 1/2" - 3" |
| Hinge Closing Type | Self-Closing |
| Fence Post Size | 2 1/2"+ |
| Body Material | Steel |
| Mount Latch | Center Mount |
| Max Gate Weight | 180 lbs. |
| Manufacturer | D&D Technologies, Inc |
